From Philadelphia, Serving the World With Polyethylene tanks SIERRA 215-258-5602

Click Here for a Products Page
Sierra Sales - From Philadelphia, serving the world of PE TANKS

 

 

 

SULFURIC ACID STORAGE SOLUTION

 

Use the Best Material for the Job
IN SINGLE & DOUBLE WALL TANKS

 

Engineers' Recommendation


Tank Material: HDLPE #880046
Fitting Material: CPVC
Gasket Material: Viton®
Bolt material: Hastelloy

 

The High Density linear resin that Sierra uses provides:

  • The best chemical barrier
  • The best chemical resistance
  • The best tank life
  • Repairable by welding, if the tank is damaged.

 


Sulfuric Acid to 98% Concentration
HDLPE resin # 880046, natural in color, 1.9 specific gravity, 600 psi, meets ASTM standards and is warranted for a FULL 3 YEAR WARRANTY for storage at ambient temperatures.

6500 GALLON ACID TANK

Specify the correct material … one that you can depend on … a material that has been proven the BEST overall for the storage of Sulfuric Acid

6500 GALLON ACID TANK

Unexposed FRP
400ft lbs 40°FHDLPE

HDLPE #880046
exposed 6 months

XLPE exposed
6 months

XLPE x Linear Liner
(Delamination)

Sierra’s HDLPE 1.9 S.G. resin #880046 is a “true” high-density linear resin.  Unlike other manufacturers who try to achieve the same results using a laminated LOW density linear liner in an XLPE tank.  Sierra uses the superior HDLPE for the whole vessel; providing a much higher tensile strength and improved chemical resistance.  

Ask the manufacturer of an XLPE tank lined with linear polyethylene what happens when they install (drill and dress) sidewall fittings through the tank wall and liner. Does the liner continue to be 100% laminated to the inside tank wall, even at the edges? 
These tanks are excellent for:

  • sodium hypochlorite storage
  • sulfuric acid plastic container
  • sulfuric acid storage container
  • sodium hypochlorite tanks
  • sulfuric acid storage
Additional advantages over lined tanks: No potential problems of total coverage of the liner material over the XLPE material during processing and, the delamination of the liner because of the constant filling and emptying processes associated with storage tanks in general.   IF, as ASTM standards allow, the tank flexes within the allowable guidelines, will the laminated liner flex and contract as one with the tank wall throughout years of service?  Using HDLPE, Sierra does not have liner issues, as we offer the superior 1.9 S.G. HDLPE #880046 resin for the entire tank in (up to) 98% sulfuric service.
Downloads:
The Sulfuric Acid Solution
The Bleach Sheet

SHIPPING FROM FIVE [5] LOCATIONS IN THE USA

As Manufactured by Snyder Industries, Inc. Lincoln, NE USA

corrosion and Chemical Resistant Polyethylene and  Fiberglass Tanks

Contact Our Tank Expert
RAPID RESPONSE QUOTE

Look around our web site. Then call us. Providing a solution for your bulk storage requirement is easy if our sales staff know a few things. Don't know what you need? We will discuss it with you. We have the right poly tanks for your needs.

CONTACT US

We answer our phones, we return phone calls, faxes, and emails, and we are the fastest trained responders in the industry! Try us, compare us, dare us, to deliver when the traditional tank suppliers take your orders and put them on the PILE!

IBC Frequently asked Questions Click here

|PRODUCTS PAGE| |DOWNLOADS PAGE| |BULK CONTAINERS| |VERTICAL CONTAINERS| |ENGINEERS PAGE|
SERVING the WORLD of TANKS - AMERICAN MADE PE TANKS

DHTML Menu / JavaScript Menu - Created Using NavStudio (OpenCube Inc.)