From Philadelphia, Serving the World With Polyethylene tanks SIERRA 215-258-5602

Click Here for a Products Page
Sierra Sales - From Philadelphia, serving the world of PE TANKS

Polyethylene Horizontal Tanks

Poly horizontal tanks are available in many configurations and capacities. Round polyethylene, hdpe and hdlpe, poly horizontal tanks are manufactured with or without legs. The smaller capacities, poly horizontal tanks under 500 gallons, can be used without the steel support hoops. Although these poly tanks are primarily designed for non DOT use, Sierra Sales does supply a few that are UN/DOT approved, plastic IBCs. Look at our 550 gallon all plastic Megatainer IBCs.
Elliptical horizontal bulk storage tanks are available from 300 to 2625 gallons. These are wider but provide SHORTER heights. Most polyethylene elliptical horizontal tanks are poly leg tanks providing the poly tank support and ease of installation.

Sierra Sales stocks the worlds' largest variety of horizontal polyethylene bulk storage tanks including the worlds' largest all plastic horizontal IBCs, 550 gallon Megatainer plastic IBCs!

Round poly horizontal storage tanks are available with molded in sump bottoms for better drainage. The smaller capacities are frequently found on equipment such as sprayers, irrigation equipment, and more. Three quarter inch drain fittings are standard on 20-55 gallon tanks. Three quarter inch and 1-1/4" drain fittings are standard on 110-200 gallon tanks. Most larger horizontal, and horizontal leg, tanks are supplied with anti-surge baffles.

Similar horizontal tanks are our below ground water storage and septic tanks. These high density polyethylene tanks are designed to be buried and have all the accessories required to make your installation complete; plumbing kits, manways, manway extensions, sanitary tees, gaskets, and more.

Sierra Sales delivers tanks constructed of HDPE (Polyethylene), HDXLPE (High Density Crosslinked Polyethylene), PP (Polypropylene), FRP (Fiberglass Reinforced Plastic), and Steel. Any material can be used to construct your vessel provided the materials are compatable with the product being stored. In most cases HDPE (High Density Polyethylene) is your BEST choice. Prefer Crosslinked Poly? Read all about it!

Linear polyethylene tanks are rototationally molded in one piece, seamless construction. HDPE tanks can be used indoors or outdoors; UV Inhibitors are added to the resin before the vessel is molded. What are these plastic resins? Read about the poly tanks resins!

HDPE and HDXLPE tanks are cost efficient and are easily installed. Polyethylene tanks are molded in every imaginable configuration; flat bottoms, cone bottoms, open tops, horizontal, cylindrical, drums, rectangular. Sierra Sales distributes every configuration.
Sierra Sales's volume sales permit the lowest possible cost to our valued customers. Sierra Sales's experienced technicians quickly provide
innovative solutions for your bulk storage requirements. Call Sierra Sales
when you can't settle for less, Sierra Sales "is" poly or polyethylene
tanks and poly or "polyethylene" containment basins.

Providing a solution for your bulk storage requirement is easy if Sierra Sales's sales staff know a few things; i.e.: What chemicals are you working with? How much? What are you going to do, mix? Ship? Storage? Where? Indoors or Outdoors? What temperatures are we working with? What are your piping requirements? Need poly containment basins? Why not consider one of our safe poly double wall self containment tank systems?

Linear polyethylene tanks are rototationally molded in one piece, seamless construction. HDPE tanks can be used indoors or outdoors; UV Inhibitors are added to the resin before the vessel is molded. How do rotationally molded PE tanks compare to fiberglass-reinforced plastic (FRP) tanks?

Advantages of tanks produced from rotationally molded polyethylene (PE) over tanks produced with FRP include: greater impact resistance, a homogeneous wall, better weatherability, a broader range of chemical resistance, and lower cost. Advantages over mild steel and stainless steel include: better stress-crack resistance in mobile applications due to stress-free construction, a broader range of chemical resistance, seamless wall construction, more economical site preparation and installation and a lower price in many cases. PE also does not dent. Take a closer look at our poly upright tanks.

And, before you leave, check out our poly containment basins and "safe" double wall, self-contained covered, plastic chemical storage tanks

Give Sierra Sales a call and find out first hand. Sierra Sales can walk you thru any chemical storage requirement. Sierra Sales will show you how easily poly tanks can be set-up. Sierra Sales will show you how relatively inexpensive poly HDPE tanks and crosslinked HDXLPE tanks and containment basins are for the extended service they provide.

Look around our site. Then call us. Call them too! Check out our tank Warranty

Browse our site, see the quality of the products, compare our services, then feel free to call or Request A Quote Check out the Engineers Click Here

Capacities and Dimensions

Fax 215-258-5606

corrosion and Chemical Resistant Polyethylene and  Fiberglass Tanks

Contact Our Tank Expert


DHTML Menu / JavaScript Menu - Created Using NavStudio (OpenCube Inc.)